Wild Rose Puzzle Box 3D Print: A Unique Challenge

The Wild Rose Puzzle Box 3D print is a fascinating project that requires patience, persistence, and creativity to solve. Assembling the box is not as straightforward as it seems, but with the right techniques and materials, you can successfully open it.

The first step in assembling the puzzle box is to work on the locking mechanism. This involves pressing the heels of your palms firmly on opposite dials to move them back and forth until they become free. The locking mechanism prints in the 'unlocked' position, which may take some getting used to.

Once you have freed the dials, you can start working on the rest of the box. To do this, use a hobby knife to wedge into the crack between the layers and then slide a sliver of Coke can into the gap. This will help loosen the parts and allow them to move freely.

It's essential to be patient when assembling the puzzle box, as it may take some time for the parts to work themselves out. The sound of layers de-laminating and moving parts freeing up is a sign that you're on the right track.

To further aid in the assembly process, you can try running a razor or sharp edge through the outer seams of the box. This will help loosen any binding issues caused by vertical seams.

Additionally, you may want to consider adding support to your print, especially if you're printing with a high overhang angle. A 100% support interface for a solid disk under the dial can help alleviate any binding issues.

Assembling the puzzle box is just the beginning. To make it even more challenging, you can try printing it in place and fully assembled, using an optimized layer height of 0.2mm.

The Wild Rose Puzzle Box has evolved from a contrived application of a gearbox design to its own unique puzzle with a completely new internal locking mechanism. This Hellraiser-themed puzzle box is part of a series of previous attempts by the designer, who is curious to see if others find it as challenging and rewarding as they do.

Some users have reported that banging the box gently on the left-front corner can help open it more easily. You may also want to add a 5mm TPU bottom to protect your furniture from any accidental damage.

If the lid squeaks when pivoted, you can try adding some light weight oil to the slots. Ironing the print can also help enhance its appearance, especially on the slotted top and box.

Finally, if you find that the recess for the magnet is too small after printing, you may need to ream it out with a drill bit or use an upside-down nail and hammer to force the magnet into place.

With patience, persistence, and creativity, you can successfully assemble and solve the Wild Rose Puzzle Box 3D print. It's a fun project that will keep you engaged for hours on end.

Wild rose puzzle box 3d print